VC-10 12v Low Voltage Sensors

VC-10 Low Voltage Sensor

12v 30amp | ALWAYS ON | NOT A DELAY TIMER

Built in diagnostic green LED indicator
Engineered electronically for reverse polarity protection
Potted compound construction. Sealed against vibration and moisture
Installation: The VS-10 continues to draw 200 mA with the ignition off, which is equivalent to a 5 amp/hour lost per day. To insure battery durability, it is recommended that a switch be installed between the battery and this device. For installation, connect the red wire (+) to the battery positive post and the black wire (-) to the battery negative post.

Length	4 in.
Width	2 in.
Height	1.5 in.
Mounting Hole Center	3.5in with #6 screws
Weight	6 oz.
Enclosure Material	Impact Resistant ABS thermoplastic

Caution: An appropriate size fuse circuit breaker must be used to ensure safety.