ACDC Industries Logo
ACDC Industries Logo

MZL-100 Ignition Sensing Delay Timer

12v 75amp | STARTS TIMING WHEN IGNITION TURNS OFF

MZL-100 Ignition Sensing Delay Timer

Diagram

MZL-100 Delay Timer Wiring Diagram

Timer Switch Settings

MZL-100 Delay Timer Switch Settings Diagram

Item: MZL-100 Delay Timer

Price: $102.30

Unit Quantity:

  • Heavy Duty 75 amp encapsulated Delay Timer.
  • Emergency override switch provides a convenient way to restore power to your equipment by holding the button in.
  • Protects communication equipment
  • Low voltage detector (10.5 v)
  • Over voltage protection (17 v)
  • Automatic On/Off
  • Very reliable & accurate
  • Programmable with external DIP switch for selecting and adjusting time delay
  • Built-in diagnostic red LED indicates timing functions active when flashing
  • Engineered electronically for reverse polarity protection
  • Potted compound construction. Solid state, sealed against vibration and moisture.
  • Delay time range:from 15 minutes to 8 hours. Tolerance plus (+) or minus (-) 10%

Technical Specifications

Length 4.25 in.
Width 3 in.
Height 1.375 in.
Mounting Hole Center 5.250 x 2.250
Weight 15 oz.
Enclosure Material Impact Resistant ABS thermoplastic

Electrical Specifications

Load Current Rate 75 amps 12 VDC
Max Inrush Current 400 amps for 1 sec @ 12 VDC
Operating Voltage 10 VDC min - 18 VDC max
Ignition Switch Trigger 10.4 - 15.0 VDC, 10mA
Low Voltage Disconnect 10.5
Over Voltage Disconnect 17 volts
Operating Temperature -40 F to +185 F

Installation: An appropriate size fuse circuit breaker must be used to ensure safety. Use 8-10 gauge wire to connect the delay timer to battery. Make a connection from the positive bolt to the positive battery post and connect the black wire to the negative battery post. Connect the blue wire to fuse block (AM/FM radio) or cigarette lighter.